Kukel International Group Limited
Categories
Home > Exhibition > Content

Learning taps and maintenance methods

Kukel International Group Limited | Updated: Apr 19, 2018

Learning taps and maintenance methods



 The division of labor means progress, which can be seen from the faucet manufacturers' increasingly refined product classification. In the past, that kind of single faucet could not meet all the requirements of people. At present, the faucets on the market can be divided into three types: bathtub faucets, basin faucets and kitchen faucets. In each category, they can be based on functions, styles, materials and colors. Divided into many small categories. Different taps have amazing differences in detail.

Compared with kitchen cabinets, basins and other large kitchen equipment, taps can be regarded as the simplest thing. But don't underestimate it, but taps are indispensable in every family. The pursuit of exquisite life is also reflected in the revamping of various faucets. Walking into the faucet manufacturers, colorful, style, shape, variety and other faucets will make you dazzled. And the classification is getting more and more detailed, and the kind of “multiple use” that we have in mind is long gone. The faucet is not only an essential item for household use, but also an integral part of the living room decoration. In order to choose the ideal faucet, there is a university to ask about it.

One: The faucet is not omnipotent

Bathtub faucet double outlet

There must be two outlets for this type of faucet. The lower one is for the bathtub and the other for the shower. After recognizing it, you should also pay attention to the fact that the length of the faucet spout is slightly longer than the width of the edge of the bathtub so that the water does not flow out when the water is poured.

Basin faucet short and short mouth

This type of faucet is used with laundry basins for laundry and face washing. So choose a faucet with a short and very low faucet that is both practical and coordinated, but pay attention to allow enough washing space. After locking this type of faucet, we must first look at whether the faucet mounting hole of the basin is single-hole or three-hole; if it is three-hole, we have to measure the distance between the mounting holes is 4 inches (about 10 centimeters), or 8 Inches (about 20 cm) before you can determine which tap is right

Kitchen faucet tall

For ease of use, the kitchen faucet should be selected higher, the outlet nozzle should be very long, it is better to extend to the top of the outlet, and there is not much difference in the internal structure of the faucet that can not be splashed, but the faucet manufacturer is in the sealing mode. There are ceramic valves and rubber seals, but there is a big difference in the external style. When purchasing, in addition to considering personal preferences, it is also necessary to consider its collocation with the surrounding environment. It is more appropriate to see whether the bottom is a menu handle, a 90-degree switch, or a spiral-up type, and then decide to purchase.

Second: to identify the quality to see, transfer, listen, knowledge

Faucet manufacturers tap the appearance is not the same, the surface is closed and very good, consumers can not easily see the internal structure of the faucet and the quality of the valve, in order to open the inspection is not easy. So, how can we buy a faucet with a hard quality without opening the faucet?

Look outside

The surface chrome plating process of good faucet manufacturers is very particular, and generally it takes several steps to complete. Resolving the faucet depends on the brightness of the faucet. The smoother and brighter the surface, the better the quality.

Turn handle

When the faucet is turning the handle, there is no excessive clearance between the faucet and the switch, and the opening is easy and unblocked without slipping. Poor quality taps not only have large gaps, but also have a large sense of obstruction.

Listen to the sound

The material of the faucet is the most difficult to distinguish. A good faucet manufacturer casts copper as a whole and knocks sound dull. If the sound is brittle, it must be stainless steel, and the quality will be worse than a grade.

Identification mark

If you do not know it, you can choose a regular faucet manufacturer brand. The general regular goods have the brand identity of the faucet manufacturers, and some non-regular products or some quality products are often only pasted some paper labels, and even without any mark, we must pay attention to when purchasing.

Three: Faucet Longevity Four Experiences

If you choose the faucet after improper maintenance can also affect its useful life. This is also the most troublesome thing for many people. In fact, this is not a difficult task. As long as the correct installation, use, and maintenance of the faucet are used, the actual service life of the faucet can be extended and it can always be bright as new.

Experience 1. Have experienced and qualified professionals perform the installation

When installing, the faucet should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as to avoid damage to the surface plating luster. If it is a new house, the water supply pipe network is a new shop, there will certainly be sand and other impurities in the water. Before installation, it is necessary to pay attention to the removal of debris from the pipeline, and discharge the water for a long time until the water quality becomes clear.

Experience 2, Guan Jin is not necessarily closed

Many people are used to deliberately turning off the tap after using the faucet. This is very undesirable. This will not only prevent leaks, but will cause damage to the seal valve, causing the faucet to shut down.

Experience 3. Good habits guarantee integrity as new

Avoid rust, usually wipe the surface of the faucet after use; there are generally more prominent faucets, so be careful not to bump or press it when you put items.

Experience 4, the flow becomes smaller to clear impurities

In the case where the water pressure is not less than 0.02 mpa, if the amount of water found is reduced, it may be that the inside of the water tap is clogged. The solution is to use a wrench to gently unscrew the nozzle cover of the water tap at the water outlet of the faucet. After the impurities are cleaned and carefully installed, they can generally be restored.


Contact Us
Address: Room 11, 8/F, Block B, Hi –Tech Industrial Centre, 491–501 Castle Peak Road, Tsuen Wan, New Territories, Hong Kong
Tel: 852-28388323
 Fax:852-23868438
 E-mail:william@kukel.com
Copyright © Kukel International Group Limited All Rights Reserved.
Share: